img
DATRON Other Accessories
DATRON Chip/Dust Disposal
70
Graphite Dust Suctioning M7 GSA
The specially powerful graphite dust suctioning system for the maching
system M7 offers the highest possible amount of protection from fine
graphite dust for the machine and its surroundings.
This is reached by means of a round table suctioning nozzle in the
machine`s protective cover. Thanks to the high suctioning power of the vac-
uum cleaner, there is turbulence in the nozzle which effectively suctions the
generated dust. Special characteristics of the suctioning system include the
low noise development and the multi-stage filter system:
Properties:
n In stage one, course particles are separated from the rest of the dust in
the ,,cyclone" and are caught in a 50 l tank.
n In stage two, the graphite dust is separated from the suctioned air in the
main filter element. The filter element is cleaned by a mechanical device.
Scope of Delivery:
Lateral channel compressor on rollers
n
Back wall with hose passage
n
Suction nozzle 225 mm
n
All required connections
n
Tubing approx. 4 m
n
Additional manual suction nozzle
n
Collection tank with PE sack for dust-free emptying
n
Application:
Graphite Dust Suctioning M7 GSA
Technical Data
Dust suctioning
n
Nominal power [kW]
4
Graphite dust suctioning
n
Nominal flow rate [m/h]
520
For sinter materials dust
n
Operating voltage [V]
400
suctioning
Sound pressure level [dB(A)]
68
Main filter surface area [m]
1.75 Kat ,,M nach DIN EN 60335-2-69
Dimension (WxDxH) [mm]
850x760x1820
Weight [kg]
161 (suctioning system only)
Order Description
Article Number
Graphite dust suctioning M7 GSA
0A01179B
Chip/Dust Disposal