img
HF Spindles and Accessories
DATRON Cooling/Lubrication systems

Basic Module
Cooling/Lubrication System EK-M
Minimum volume cooling/lubrication system for DATRON CNC machines
The DATRON cooling/lubrication system is used everywhere where lubrication
is to be done with especially small volumes of liquid, directly, repeatability
and process-safely during milling and engraving.
A flow of compressed air is applied to the cooling lubricant liquid in a pres-
sure tank, which is pressed into capillary hoses which feed into the two-
component nozzles. The capillary hose here functions as a dispensing com-
ponent. The desired minimal liquid volume is set via the container pressure,
which can be read off a manometer. The flow speed in the capillaries changes
by changing the pressure. This way, the liquid volume can be controlled reli-
ably and evenly up to nearly zero consumption.
Please consider: According to your application either a 2-nozzle or 4-nozzle
spraying unit has to be ordered.
Properties:
n Can be electronically switched on/off via the hand-held control unit
n Coolant consumption 0 - 1 l/h
n Various cooling media can be used
Scope of Delivery:
n 5-litre storage tank
n Software extension for automatic mode
Options/accessories:
n 4-nozzle spraying unit (Art. No. 0A01106R)
n 2-nozzle spraying unit (Art. No. 0A01109R)
n Filling level monitor
n 9-litre coolant storage tank
Advantages:
Various cooling media can be
n
used
n Finely dispensable spray volume
Order Description
Article Number
Application:
Cooling/Lubrication system EK-M with 5-Litre storage tank,
0A01109A
Workpiece cooling
n
Basic Module
n Tool cooling
Cooling/Lubrication system EK-M with 9-Litre storage tank,
0A01109B
n Lubricating the cutting edge
Basic Module
n Use for HSK spindles
Cooling/Lubrication system EK-M with 5-Litre storage tank
0A01109C
and Filling level sensor, Basic Module
Cooling/Lubrication system EK-M with 9-Litre storage tank
0A01109D
and Filling level sensor, Basic Module
Cooling/Lubrication Systems